24. Dezember Lichtgesteuertes Stimmungslicht
Verfasst: 24.12.2018, 08:22
24 Lichtgesteuertes Stimmungslicht
Hinter dem letzten Türchen findest du eine weiße LED und als Bonus eine zweite weiße LED und zwei Widerstände (1kOhm und 470Ohm).
Baue nun ein festliches Weihnachtslicht mit vier LEDs unterschiedlicher Farbe auf.
Die LEDs blinken im Gegentakt und mit weichen Übergängen, sodass der Eindruck eines sanften Flackerns entsteht.
Das Flackern wird unterdrückt, solange es noch hell ist. Erst wenn du den Raum etwas abdunkelst, wird die Schaltung aktiv.
Der Fototransistor aktiviert bei großer Helligkeit den Reset-Eingang des NE555.
Wenn die Schaltung auch bei hellem Licht funktionieren soll, muss der Fototransistor aus der Schaltung entfernt werden.
Der Timer arbeitet dann in der üblichen Blinkschaltung. Beide Transistoren bilden langsame, invertierende Schalter.
Zusammen mit einem Kondensator zwischen Kollektor und Basis hat man ein Tiefpassfilter, das für die sanften Übergänge sorgt.
Am Ende dieser Versuchsreihe entwickelst du sicher viele weitere Ideen dazu, was du mit den Bauteilen noch probieren könntest.
Denn hier konnte nur ein kleiner Teil aller möglichen Anwendungen gezeigt werden.
Einzelne Schaltungen können verändert und für besondere Zwecke optimiert werden.
Oder du setzt ganz neue Ideen um. Bleibe kreativ.
24 Light-controlled mood lighting
Behind the 24th and final door, there is a white LED and as Bonus a second white LED and two resistors (1kOhm und 470Ohm).
Now, ou can build festive Christmas lights with four LED of different colours.
The LEDs are blicking with push and pull and soft changes, so that it seems like they are gently flickering, like candles.
The flickering is suppressed as long as it is light; if you darken the room, the circuitry activates.
In brightness, the phototransistor activates the Reset-entry of the NE555.
If you want the circuitry active in brightness too, the phototransistor needs to be removed.
The timer then works with the usual blinking circuit. Both transistors function like slow, inverting switches.
In connection with a capacitor between Collector and Base in works like a lowpass filter (LPF) which is the reason for the soft transitions.
At the end of these experiments, you surely will come up with many other ways to use these parts.
This is only a small range of all the possible uses for these.
Individual circuits can be adapted and optimised for many other functions.
Or you could develop something entirely new.
Stay creative!
Hinter dem letzten Türchen findest du eine weiße LED und als Bonus eine zweite weiße LED und zwei Widerstände (1kOhm und 470Ohm).
Baue nun ein festliches Weihnachtslicht mit vier LEDs unterschiedlicher Farbe auf.
Die LEDs blinken im Gegentakt und mit weichen Übergängen, sodass der Eindruck eines sanften Flackerns entsteht.
Das Flackern wird unterdrückt, solange es noch hell ist. Erst wenn du den Raum etwas abdunkelst, wird die Schaltung aktiv.
Der Fototransistor aktiviert bei großer Helligkeit den Reset-Eingang des NE555.
Wenn die Schaltung auch bei hellem Licht funktionieren soll, muss der Fototransistor aus der Schaltung entfernt werden.
Der Timer arbeitet dann in der üblichen Blinkschaltung. Beide Transistoren bilden langsame, invertierende Schalter.
Zusammen mit einem Kondensator zwischen Kollektor und Basis hat man ein Tiefpassfilter, das für die sanften Übergänge sorgt.
Am Ende dieser Versuchsreihe entwickelst du sicher viele weitere Ideen dazu, was du mit den Bauteilen noch probieren könntest.
Denn hier konnte nur ein kleiner Teil aller möglichen Anwendungen gezeigt werden.
Einzelne Schaltungen können verändert und für besondere Zwecke optimiert werden.
Oder du setzt ganz neue Ideen um. Bleibe kreativ.
24 Light-controlled mood lighting
Behind the 24th and final door, there is a white LED and as Bonus a second white LED and two resistors (1kOhm und 470Ohm).
Now, ou can build festive Christmas lights with four LED of different colours.
The LEDs are blicking with push and pull and soft changes, so that it seems like they are gently flickering, like candles.
The flickering is suppressed as long as it is light; if you darken the room, the circuitry activates.
In brightness, the phototransistor activates the Reset-entry of the NE555.
If you want the circuitry active in brightness too, the phototransistor needs to be removed.
The timer then works with the usual blinking circuit. Both transistors function like slow, inverting switches.
In connection with a capacitor between Collector and Base in works like a lowpass filter (LPF) which is the reason for the soft transitions.
At the end of these experiments, you surely will come up with many other ways to use these parts.
This is only a small range of all the possible uses for these.
Individual circuits can be adapted and optimised for many other functions.
Or you could develop something entirely new.
Stay creative!