Baukasten Forum / CC Experimentiersystem -> WIKI: /www.rigert.com/ee-wiki

Hallo Helferlein!

Ich danke Ihnen sehr fur dieser beispiel.

Ich habe ein gedank, ist es vielleicht möglich alles zusammen holen?

Ich mein deutch nur probieren :)

Mit freundlichen grussen, Roger

I am a little bit confused. Is it possible for members to totally ignore messages from other members? My message to JeanLuc7 was sent in the begilling of July and now it is almost September, yet it has not even been read . Can he have missed it or am I just being ignored? Best regards, Roger PS It d...

Hi Roger, Actually, I did not get any message from you containing your address. My last question in my PN was if you prefer the schematics on white paper or on recyced paper. I think I have both of them available. The recycled ones are later issues. BR Frank Hi Frank! Just want to show this nice fo...

I thank you for this recommendation! It didn't feel right and I got worried, just thought that when Frank told me he didn't got my private message I kind of thought there was something wrong with the PM system. I am very concious about what information I provide openly over the internet but this tim...

Hi Frank!

The paper quality does not matter.

Here is my address:

deleted by suntri for security

Best regards, Roger

Hello JeanLuc7!

Have you perhaps missed my private message where I give you my adress?

Or have I done something wrong?

Best regards, Roger

Hello JeanLuc7!

What fantastic news!

I would need all of the schematics for EE2004-EE2006.

Do you perhaps have them?

Best regards, Roger

I just wonder if it is possible to get in hold of the paper schematics for EE2004-EE2006? I have for EE2003, even though some of them are used. I really don't know if this is neccesary but to make things complete. Bets regards, Roger PS I have a friend that will print my EE2003 and EE2004-EE2006 pdf...

Hello Frank! No, i didn't know that so thank you very much! I did however not quite understand what you mean, would you mind reprasing it? I am finished with my tiny PCB boards now, I have all the transistors I need thanks to you and some other guys. Now I can configure my gift of EE-boxes and the E...

I have now soldered and painted my four BF194. Two of them comes from Frank, these BF194 has tenn plated pins and they have the text printed on top of capsule. The other two comes from Mange71 a swedish forum friend, his BF194 has golden pins and the text is printed on the side. I dotted red paint o...

I am now finished with BC238 (white). I did however had to turn Frank's transistor 180 degrees because they did not follow convention but I am very happy anyway :) Hfe for the transistors from left to righ in picture is: BC238C_F: 467, BC238C_F: 375, BC238C: 685, BC238C: 590 Here I have denoted the ...

Hello Frank! Thank you! What I meant is that I have two kinds of BC328 that differ rather much in hfe. I do not know if this is important but I am just telling you this as well as showing you some fugures above. Now, BC238 is another thing mainly because it is a NPN (BC328 is a PNP) and I just said ...

Hello! I have now finished soldering and painting both BF245A and BC328. BF245A is on all four PCBs, BC328 is also on all four PCBs BUT I have two kinds. Frank gave me one kind, BC328-40. A swedish friend in my forum gave me another kind, BC328-T. I have measured: BC328-T: 328/332 hfe BC328-40: 416/...

I have now painted all four BF245A-using PCBs. I have used my plywood board to test the transistors. I have tested something I call Rdss, that is connection of GS together and measureing the resistance from Drain to GS. I get something like 250+/-100 Ohms for the lot, I have also tested what happens...

Hi Frank & Frank! Today I made it happen, I marked (not painted) one BF245A with a yellow dot. Frankje had told me that the color for BF245 was yellow and now you too tells me that so I decided to change my blue color to yellow. But I did not buy a spray-can of yellow paint, I just bought a smal...

Hello Frank! Thank you for your reply. I have thought of something adhesive but it will be more difficult to apply them in correct angles, also you can not reuse the adhesive/tape so you will have to create new ones for every pair of letters. I am fascinated that BF245 already has its color, didn't ...

Hello! I have now spray-painted one of the above tiny PCBs nicely bought from Ingo with blue color. The blue color is for FET-PCBs and I have at least four of them. While blue is not a Philips PCB color I am thinking BF245A for these PCBs. Another advantage with blue is that I am allowed to test and...

Ich habe jetzt mein pulpet planiert. Ich werde zwei reihen frühling benutzt. Eine reihe sind 24 anzahl aus, zwei reihen sind 48 anzahl aus. So ich kann 48 kontakten benutzen und als ich denke gehabt vielen anderen komponenten denn mag benutzt werden. Jetzt ich werde das pulpet planieren als ich jetz...

Hallo Helferlein! Schönes "ding" Sie gemacht haben! Und schönes platte sie gekauft haben! Ich möchte aber Ihnen erzählen als ich auch eine platte von "Baumarkt" gekauft habe, ich began meinen renovieren mit diser platte aber die raster war nur 13mm so ich konnte dieser platte nic...

Hello Frankje! I thought I answered your nice post but obviously I did not, sorry? The manual actually is included, it is in Swedish. I visited both you nice sites, they were interesting and I downloaded the manual for EE2007/8 (in German) just in case that will happen. So you wish to se a design on...

Santa Claus visited me early this year :) A friend I met in my swedish forum suddenly wanted to give me an almost complete EE2003. With that comes a Platte and my long lost consule, almost all the other components I already had. This changes my strategy. I now wish to give this EE2003-box to the son...

I have a friend that made me die platte, he has given me this photo that he claims he can produce. I have not spoken to him for a while but I hope he can make a consol like that. Today I have planned the preliminary dimensions of the consol and that is 50X100X375mm, a two row platte will be added (4...

Hello Physiker66! I did exactly what you suggested. I began by testing my Fluke 23 DVM with regard to how high resistance it can measure by connecting two 10M resistors in series which gave me a 20M reading. Then I measured between the two springs on my platte and got overload as reading which means...

Hello Frankje! Yes, I fantasticly enough have the two variable capacitors (5-180pF dual gang and 5-180pF single gang), but that was not so easy. I had the dual gang but the single gang, I got from a friend. I will contact you about the BF194, hope you want to sell me two more? I actually have the bl...

Hello Physiker66! I have now looked up the resistivity of wood vs PVC in my Physics Handbook, they were the same that is some 10^12 [Ohm m]. So wood is equally good an insolator as PVC (which is often used as wire insolation). However, I think you are kind of worried about the burnt holes were Carbo...

I just want to show you how my platte works.

It is nothing special, just fun.

Mit Freundlichen Grüssen, Roger

Thank you for this tip! I see that Helferlein also makes lamp covers, I have only one left so my plan up to now has been to omit the lamp covers BUT now that seem not so neccessary. Then I see that his post from Mars last year has generated over 5000 hits, how is this even possible? :) Mit Freundlic...

I wish to add a picture that is not so important but is part of my work while constructing Die Platte. A friend of mine made die platte using laser then I turned it over and glued a frame beneath die platte. The frame was made of 8X8mm pine wood because I had come to the conclusion that that would s...

Hello!

I just want to show a cople of pictures of transistror PCBs I recently got from Ingo63.

I love these PCBs :)

Best regards, Roger
PS
Ich danke Ingo sehr!

Hello Frankje! Thank you very much! I would very much like to buy those diodes from you! Today have checked that the shipment cost for a letter from Sweden to Germany is somewhere around 2 Euro and I recon the shipment cost the other way around is approximatelly the same. My offer to you, if you cho...

Hallo Wolfgang! Ich danke Ihnen sehr fur die information. Mit dem post ich habe jetzt drei, mit jeden anzahl, BC238/A/B/C und BC328 (aber es sagt nur "BC328-T"). Jetz ich nur drei BA217 und ein OA95 diod verpassen. Aber dieser ist nicht wahr als ein person in dieser sehr gemutlich forum ha...

Hello and welcome to the forum of fun :P What a great looking plywood construction board you have ! We would love to help you in the reconstruction of your EE set. Maybe you can set up a goal first, what would you like to achieve ? What parts do you need ? I have some "New Old Stock" part...

Thank you Physiker66! Strange differences in the hfe values! With regard to this I agree with you that hfe does not seem so important. However, I have BC238A/B/C (White) on the way to my home so I could choose if I like but only if I know what to choose. I also have BC328 (Green) on the way to my ho...

Herzlich willkommen im Forum! Schön, dass Dich unsere Leidenschaft für (Elektronik-)Baukästen zu uns geführt hat. Wenn Du Dich im Forum umsiehst, wirst Du feststellen, dass ich mich mit 3D-Druck beschäftige. Vielleicht kann ich Dir bei der einen oder anderen Rekonstruktion helfen. Mit der Sprache d...

Hallo Peter! Es tut mir leid aber ich war ein bischen schnell mit was ich fragen wollte. Ich komme aus schweden... :) Ich möchte wissen die hfe fur die EE experimentierkasten. Später dieser woche ich hoffe ich habe BC238A/B/C und BC328 (hfe nich sicher), jetzt ich möcte nur die hfe anzahl wissen. Da...

willkommen - welcome und die meisten hier verstehen auch ganz gut Englisch wenn dir das weiter hilft. Ich habe dein Problem mit den Transistoren nicht verstanden, kannst du das bitte noch mal erklären? and most people here understand English quite well, if that helps you a bit. I did not understand...

Hello! Ich möchte wissen die hfe verstärkung fur BF194, BC238 und BC328. Ich bleibe dieser ist nich eine problem fur BF194 aber die andere sind nicht sicher. Ich habe bald BC238A/B/C und BC328 (die vertärkung anzahl bist hier nicht sicher). Ich hoffe Sie mir helfen kann. Danke sehr! Mit freundlichen...

Gruss got! Ich komme aus schweden und ist nicht so gut in deutch aber es macht mir sehr spass versuchen. Als ich ein kind war meinen gross-mutter hat mir EE2003-EE2006 gegeben. Dieser baukäufts hat mir sehr spass gegeben. Jetzt ich habe dieser alte baukästen fast vergessen und das habt mit mir alt g...

Baukasten Forum / CC Experimentiersystem -> WIKI: /www.rigert.com/ee-wiki

Die Suche ergab 38 Treffer

Re: EE2003-EE2006 renovieren

Re: EE2003-EE2006 renovieren

Re: EE2003-EE2006 renovieren

Re: EE2003-EE2006 renovieren

Re: EE2003-EE2006 renovieren

Re: EE2003-EE2006 renovieren

Re: EE2003-EE2006 renovieren

Re: EE2003-EE2006 renovieren

Re: EE2003-EE2006 renovieren

Re: EE2003-EE2006 renovieren

Re: EE2003-EE2006 renovieren

Re: EE2003-EE2006 renovieren

Re: EE2003-EE2006 renovieren

Re: EE2003-EE2006 renovieren

Re: EE2003-EE2006 renovieren

Re: EE2003-EE2006 renovieren

Re: EE2003-EE2006 renovieren

Re: EE2003-EE2006 renovieren

Re: EE2003-EE2006 renovieren

Re: EE2003-EE2006 renovieren

Re: EE2003-EE2006 renovieren

Re: EE2003-EE2006 renovieren

Re: EE2003-EE2006 renovieren

Re: EE2003-EE2006 renovieren

Re: EE2003-EE2006 renovieren

Re: EE2003-EE2006 renovieren

Re: EE2003-EE2006 renovieren

Re: EE2003-EE2006 renovieren

Re: EE2003-EE2006 renovieren

Re: EE2003-EE2006 renovieren

Re: EE2003 Transistoren

Re: EE2003-EE2006 renovieren

Re: EE2003-EE2006 renovieren

Re: EE2003-EE2006 renovieren

Re: EE2003 Transistoren

Re: EE2003-EE2006 renovieren

EE2003 Transistoren

EE2003-EE2006 renovieren